REGLOPLAS 300L, Руководство по эксплуатации

Страница: 13 / 41

V 09/2011
Temperature Control Unit 300L(D)/350L(D) Operating Instructions
•
9
Operation of the Temperature Control Unit
The temperature control unit must only be switched on after inspecting
the consumer, connecting the connecting lines and electrical connec-
tions, and opening the outlet/inlet shut-off valves. The vent valves on the
consumer and the shut-off valves (if present) must be open.
RT100 Control System
RT100 Control System - front panel
Buttons
Setting the set-point value Scrolling through pages
Setting the additional display Setting the parameters
Selection of the device functions (toggling
SP1/SP2, drainage by suction, leak-stop)
Alarm reset and alarm history
Button ON/OFF
Status LEDs
Normal mode Warning Alarm
Status display
Display of set-point
value SP1/SP2 or ex-
ternal operation
RCD control knob
(Regloplas Control Dial)
Symbol area
Display of zone and tem-
perature probe
Sn1/Sn2/Sn3
Status LEDs
Selection of the device
functions
Display of actual
value
Additional display
Interface address