2
ENGLISH
Congratulations.
You have purchased a Regent motion activated floodlight for outdoor lighting.
When installed properly, this security lighting system will provide years of convenience and pro-
tection for your home and family.
How it works
Your Regent motion activated floodlight senses heat from objects such
as people, large animals and automobile engines. When motion is
detected, the lights will automatically turn on. Once motion has stopped,
the lights will automatically turn off after a preselected time delay. Your
motion light also has a Night Time On and standard floodlight feature
which will allow your fixture to automatically come on at night (for a
select period of time) or to operate as a standard floodlight (manual
override).
W
What you need
• Phillips screwdriver
• Outdoor weatherproof silicone caulking
What’s included
• Motion detector and light fixture (A)
• (2) 100 watt quartz halogen bulbs (B)
• Coverplate gasket (C)
• (2) #8 screws (D)
• (2) #6 screws (E)
• (3) Wire nuts (F)
• Mounting bracket (G)
• Center bolt (H)
• Color matched center hole plug (I)
• Light switch cover (J)
• Mounting hook (K)
What to know
• For outdoor use only.
• UL and cUL LISTED for wet locations.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. Under
Part 15 of the FCC Rules, any changes or modifications to the motion detector described in this
instruction sheet that are not expressly approved by Cooper Lighting could void the user’s
authority to operate the equipment. NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Fixture must be connected to a 120 Volt, 60 Hz power source. Any other connection voids
warranty.
• Fixture should be mounted to a grounded junction box marked for wet locations.
• Keep fixture away from flammable objects. Do not mount body of fixture within one
inch of any combustible materials.
• The bulb and fixture get extremely hot during use.
SV278, CSV278 (Bronze),
SV278W, CSV278W (White)
60 feet
270 degrees
F
C
H
I
D
G
E
A
K
J
B
SV278/SV278W I.S. 10/21/03 11:12 AM Page 2
All manuals and user guides at all-guides.com
