Regency L234-LP10, Инструкция для владельца и по установке

Страница: 11 / 48

Liberty
®
L234-10 Direct Vent Gas Insert
| 11
|
11
installation
MINIMUM CLEARANCES TO COMBUSTIBLES
Side Walls A 8" (203 mm)*
Ceiling B 56" (1422 mm)
Min. Mantel Height C 21" (533 mm)
see Diagram 1
Max. Mantel Depth D 12" (305 mm)
see Diagram 1
Alcove Width E 60" (1524 mm)
Alcove Depth F 36" (914 mm)
**Hearth Height- G 1-1/2" (38 mm) Minimum
Non combustible
Hearth Width
H 28" (686 mm)
Hearth Depth I 12" (305 mm)
* Alcove side wall must have a minimum of 8" clearance.
**Note: A 1-1/2" high non-combustible hearth is required if unit is not
raised off the ground a minimum of 4"
COMBUSTIBLE MANTEL CLEARANCES
Because of the extreme heat this fireplace emits, the mantel clear-
ances are critical. Combustible mantel clearances from top of door frame
are shown in the diagram below. Mantel may be installed anywhere in the
shaded area or higher.
Note: A non-combustible mantel may be installed at a lower height.
Note: Ensure the paint that is used on the mantel and the facing is
“heat resistant” or the paint may discolour.
Unless otherwise stated the clearances listed below are Minimum distances
to combustible materials
.
Please Note: A major cause of chimney related
fires is due to a failure to maintain required clearances (air space)
to combustible materials. It is of the greatest importance that this
insert and vent system be installed only in accordance with these
instructions.
Faceplate
Combustible
Flooring
Mantel
C
12" Max.
D
Top of
Door Frame
Faceplate
12” Min.
Hearth
Mantel
C
12" Max.
D
Existing or
Non-Combustible Hearth
Top of
Door Frame
4” min
G
INSTALLATION WITH NON-COMBUSTIBLE
HEARTH IN FRONT
INSTALLATION WITH COMBUSTIBLE
FLOORING IN FRONT
Faceplate
Combustible
Flooring
Mantel
C
12" Max.
D
Top of
Door Frame
Faceplate
12” Min.
Hearth
Mantel
C
12" Max.
D
Existing or
Non-Combustible Hearth
Top of
Door Frame
4” min
G
Diagram 1
No hearth required if the unit
is raised 4" (102mm) or more.
**