background image

           FPI FIREPLACE PRODUCTS INTERNATIONAL LTD.  6988 Venture St., Delta, BC  Canada, V4G 1H4

919-295a

MODELS:   L540PB-NG2 Natural Gas                L540PB-LP2 Propane
                   HZI540PB-NG2 Natural Gas            HZI540PB-LP2 Propane

WARNING:  
Improper installation, adjustment, alteration, service or 
maintenance can cause injury or property damage. Refer to 
this manual. For assistance or additional information consult 
an authorized installer, service agency or the gas supplier.

FOR YOUR  SAFETY
Do not store or use gasoline or other fl ammable vapours and 
liquids in the vicinity of this or any other appliance.

Installation and service must be performed by an authorized 
installer, service agency or the gas supplier.

FOR YOUR  SAFETY
What to do if you smell gas:
  Do not try to light any appliance
  Do not touch any electrical switch: 

do not use any phone in your 
building.

  Immediately call your gas supplier 

from a neighbour's phone. Follow 
the gas supplier's instructions.

  If you cannot reach your gas 

supplier, call the fi re department.

L540PB / HZI540PB Gas Insert

11.04.13

Owners & 

Installation Manual

Tested by:

Installer: Please complete the details on the back cover 

and leave this manual with the homeowner.

Homeowner: Please keep these instructions for future reference.

www.regency-fi re.com

Содержание HZI540PB

























































Отзывы: