Regency HRI4E-LP Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 56

Regency HRI4E-LP Скачать руководство пользователя страница 22

22

|

LRI4E / HRI4E Direct Vent Gas Insert

|

22

installation

GLASS CRYSTAL / CERAMIC SPA STONE INSTALLATION

Installing Glass Crystals

Spread the Glass Crystals or Stones evenly over the burner. Ensure the crystals/stones do not overlap excessively as this will affect the flame pattern.

IMPORTANT NOTE:
Only the supplied approved Glass Crystals and Stones are to be used with these fireplaces. Use of any other type of glass crystals or stones can alter the
unit's performance, any damage caused by the use of any unapproved glass or stones will not be covered under warranty.
When using Ceramic Spa/Volcanic Stones DO NOT cover burner ports or pilot light that lead to pilot flame.

OPTIONAL PEBBLES / GLASS CRYSTAL INSTALLATION FOR FIREBOX BASE (AROUND BURNER)

Firebox (Around Burner) Packages

Unit

Glass Crystals

Pebbles

HRI4E

5 lbs burner

1 package (use 3 bags pebbles)

There are 2 optional packages to choose from to cover the firebox base:

1) Natural River Pebbles

2) Glass Crystals (4 colors available)

Spread the pebbles / crystals evenly on the exposed base of the firebox. Pebbles are NOT to be placed anywhere on the burner or over top of the Glass

Crystals or optional Stones.
IMPORTANT NOTE: Only the supplied and approved pebbles / glass crystals are to be used with these fireplaces. Use of any other type of pebbles, glass

crystals or other material can create a danger and will void the warranty.

BURNER PACKAGES

Unit

*Glass Crystals Fire Beads

Stones - Spa / Ceramic / Volcanic Stones / Driftwood Logs

HRI4E

8 lbs [5 lbs

3 lbs firebox]

8 lbs [5 lbs

3 lbs firebox]

7 lbs Glass + 1 package (70 Spa Stones)

8 lbs Beads + 1 package (70 Spa Stones)

4 lbs Glass + 26 Volcanic Stones

8 lbs beads + 26 Volcanic Stones

NOTE: * Glass Crystals are not supplied with the unit. Must purchase separately - see quantities above.

Spa stone package contains 70 stones.

DO NOT block pilot area with glass crystals

Glass Crystals shown on Burner and Firebox Floor

«
...
20
21
22
23
24
...
»

Содержание HRI4E-LP

























































Отзывы:

Нет отзывов