Regency Cascades I1500, Инструкция для владельца и по установке

Страница: 29 / 44

I1500 Regency Wood Insert
| 29
29
|
maintenance
Annual Maintenance
Completely clean out entire unit Annually
Inspect air tube, Catalytic Combustor and bricks Replace any damaged parts.
Adjust door catch assembly If unable to obtain a tight seal on the door - replace door gasket seal.
Readjust door catch after new gasket installed.
Inspect condition and seal of:
Glass Gasket
Door Gasket
Perform paper test - replace gasket if required
Paper Test Test the seal on the loading door with a paper bill.
Place a paper bill in the gasket area of the door on a cold stove.
Close the door.
Try to remove the paper by pulling.
The paper should not pull out easily, if it does, try adjusting the door latch, if that
doesn't solve the problem replace the door gasket.
Check and lubricate door hinge + latch Use only high temperature anti seize lube. (ie. never seize)
Check glass for cracks Replace if required.
Clean blower motor Disconnect power supply.
Remove and clean blower.
*DO NOT LUBRICATE*
Inspect and clean chimney Annual professional chimney cleaning recommended.
Thermostat Probe The thermostat probe that is inserted into the opening above the insert must be
cleaned at least once a year. Use 220 sand paper to clean probe. Access to the
probe can be done in 2 ways.
- by removing the catalyst as this will be exposed once the catalyst is removed.
- by removing the faceplate. However, there must be clearance above the insert
to be able to remove the probe from the top of the insert.
See specific details in this manual.
NOTE:
Chimney Cleaning
When cleaning the chimney system the air tubes, baffles should be removed for ease of cleaning. See manual for details on removal.
The bypass should be moved all the way outward so any creosote will fall onto the firebox floor when being cleaned.
Alternatively, the catalyst may be removed so this can also be cleaned at the same time following the guide lines found in this manual.
We highly recommend that the chimney cleaning be done by a professional as they will have the necessary tools such as a proper sized
brush and special vacuum cleaner designed to deal with fine particles.