Regency Cascades I1500 Скачать руководство пользователя страница 12

Страница: 12 / 44

I1500 Regency Wood Insert

installation

920-023

03/10/19

I1150/I1500

Faceplate

Top

Faceplate

Side

Faceplate

Side

Regular/Oversize Faceplate Installation:

Thread the black 1/4" x 3/4" long hex bolts into the faceplate mounting

bracket as shown in Diagram 1, leaving them approximately 1/4" out.

Fasten the faceplate mounting bracket to the side of the insert using

2 bolts for the top and bottom, see Diagram 1. Repeat for other side.

NOTE:

The bolt and washer come attached to the side of the insert

and need to be removed and reused for fastening.

Diagram 1

Assemble the faceplate sides and top using the 1/4" x 1/2" long hex

bolts, lock washers, and nuts provided. Do not tighten. See Diagram

I1500s only: Install Digital Monitor Operating Tool Bracket as shown.

See diagram 2A. Tighten all of the bolts. The tool holder can then be

slid into the tool bracket as shown.

Digital monitor operating door

tool bracket

Tool holder slid into tool bracket

Tool holder

Diagram 2A

Rear View

Position the assembled faceplate side and top to the insert. Ensure

to align the draft rod into the opening of the faceplate as well as the

side faceplate slots with the bolts in the mounting brackets as shown

in Diagram 3.

Measure the height between the hearth and the bottom of the side

faceplate.

Cut the bottom faceplate to the measured height using a metal cutting

blade.

Remove the faceplate assembly from the insert and attach the cut

bottom faceplate to the faceplate sides using the 1/4" x 1/2" long hex

bolts, lock washers and nuts provided as shown in Diagram 4.

Diagram 3

Rear View

Diagram 4

Optional

Regular/Oversize Bottom Faceplate

Installation:

If the insert is going to sit on the hearth proceed to

"Faceplate Trim Installation" (step 8) otherwise con-

tinue on to "Bottom Faceplate Installation" (step 4).

Diagram 2

Rear View

Left

Right

Содержание Cascades I1500













































Результаты поиска

Содержание Cascades I1500

Отзывы:

Похожие инструкции для Cascades I1500

Бренды по названию

Популярные бренды

Regency Cascades I1500, Инструкция для владельца и по установке

Результаты поиска

Содержание Cascades I1500

Отзывы:

Похожие инструкции для Cascades I1500

Бренды по названию

Популярные бренды