Fireplace Products Australia Pty Ltd.
1 Conquest Way, Hallam VIC Australia 3803
Phone:
+61 3 9799 7277 •
Fax:
+61 3 97997822
www.regency-fire.com.au
3
Outer panel assembly
5.
Fit outer right hand side panel - (ventilation holes to the bottom) panel fits between inner return
(front) and base panel – Screw to base from outside.
6.
Fit outer left hand side panel - (ventilation holes to the bottom) panel fits between inner return
(front) and base panel – Screw to base from outside
7.
Fit outer rear panel – sticker facing out (ventilation holes to the bottom) panel will slide inside
returns (rear) on outer side panels – Screw to base and sides from outside
8.
Fit outer top panel – panel fits on outside of outer side and rear panels – Screw from outside
9.
Fit base plate facing up to outside of outer panels
Flue locating plate pictured above is in the correct position for the Bellerive.
