Regada MP 52 200, Инструкции по установке, обслуживанию и техническому обслуживанию

Страница: 9 / 22

MP 52 200 7
Position unit (11)
After pressing it is integral with the gearwheel (13) and
dismantling is not available. The switching-off tips (53),(54),(56),(57)
are screwed into the nuts placed in the positional unit groove. After
loosening of the switching-off tip in the nut the tip-nut pair can by
moved in the groove. The tips are designed to switch off the
positional unit microswitches (37),(38),(39),(40) (Fig.4)
Fig.4
Module М 4 – a control box
Fig. 5
Position unit (11)
After loosen a nut of the position unit (51) is
possible to rotate (53),(54),(56),(57). The
construction of position unit is designed so that
transforming one of the cams, it does not disturb
the others. After adjusting the position unit is
needed to tight the nut (51). The switch-off cams
are designed to turn-off the positional unit
microswitches (37),(38),(39),(40) (Fig.6)
The transmission unit
The unit drive is derived from the gear unit(8). Gear wheels (12),(13),(14) and the transmitter
joint make up a module. Rotary movement from the gears (8) to the transmitter(10) is transfered via
the clutch after tightening of the screw.
Fig.6