Regada MP 52 200, Инструкции по установке, обслуживанию и техническому обслуживанию

Страница: 11 / 22

MP 52 200 9
Other specifications:
Protection enclosure of EA:
...........................................................................IP 55 (STN EN 60 529)
.......................................................................... IP 65 (required to be confimed by the producer)
Self-locking: .................................... guaranteed within 0% till 100% load torque except load torques
Power supply: ............................................................................................................. 230 V AC ±10%
Power supply frequency ................................................................................... 50 Hz or 60 Hz ± 2%
Note : At frequency of 60 Hz closing time is reduced by 1.2 times.
Switching-off: ............................................................................................................... DB 6 (Cherry)
Switching-off voltage max. ...............................................250V(AC), 50/60 Hz, 2A or 250V (DC); 0.1A
Space heaters
Heating power: ............................................................................................................ ca 20 W/55°C
Mechanical ruggedness
sinusoid vibrations ................................................................................................... (V1,STN 18 0002)
Adjustment of the positions switches
The end position of switches ................................................................................... operating angle±1°
Additional position switches..................................................................... 5° in front of the end position
Adjustment of the torque switches:
If other adjustment not specified the switching torque is set to the maximum value with tolerance of
±15 %.
Adjustment of the resistive transmitter:
- the position “open” ................................................ ≥ 93% of rated value
- the position “close” ................................................ ≤ 5% of rated value
Adjustment of the capacitive transmitter:
- the position “open” ................................................ 20 mA
- the position “close” ................................................ (0)4 mA
Weight: 27 up to 29 kg
Lubrication: grease HF 401/0 (GLEITM-
m
)
Gearbox oil PP 80
1.7.2 Mechanical Connection
·
Lever-joint mechanism
Main and connecting dimensions are given in the dimensional drawings.
1.7.3 Electric connection
to the terminal board(X): .................................max.32 terminals with wire diameter max.2,5mm
2
............................................2 cables bushings – M25x1,5 with cables diameter 11 up to 17 mm
to the connector: ...............................................max.32 terminals with wire diameter max.0,5mm
2
the protection terminal:
- external and internal ones, mutually joined and marked with the protection earthling mark.
Electric connection is provided according to the
wiring diagrams .
Electronic position controller (N)
Controller software equipment:
A) Function and parameters
programmable functions:
·..
with functional buttons SW1, SW2 and LED diodes D1, D4 directly placed on controller
·..
with computer or terminal equipped with corresponding programme, using RS 232 interface.
programmable parameters:
·..
control signal
·..
response to SYS-TEST signal
·..
mirroring (ascending/descending characteristics)
·..
insensitiveness