5
Step 4 – Set Link Position
Select 12. Link Setup
Press ENT
At 1. Set My Position
Press ENT
For Tower 1 Select ‘First’
For Tower 2 Select ‘Middle’
For Tower 3 Select ‘Last’
Press ENT
Press ESC
Power OFF the Towers
Note: Additional towers should that are
between the first and last tower in the
chain should be set to ‘middle’
12. Link Setup
[Link Setup]
1. Set My Position
[Set My Position]
==>First
Step 5
Power ON the Duplication Towers. The
screen will show the total number of
drives detected
Next it will display the number of towers
detected
At 1. Copy, the unit is ready for use
Total Burner Q’ty
30
Total
3 Stations
1. Copy
3 Stations