Reer MOSAIC Master M1, Быстрое руководство по установке

Страница: 15 / 20

8540797 02 • 18/03/2021 • Rev.1 15
MOSAIC M1 - MASTER MODULE
E
n
g
li
s
h
RESTART_FBK
The RESTART_FBK signal input allows the MOSAIC to verify an EDM
(External Device Monitoring) feedback signal (series of contacts) from the
external contactors, and to monitor Manual/Automatic operation. See all
the possible connections in the Mosaic manual available online for free
download.

If the application requires it, the response time of the external
contactors must be verified by an additional device.

The RESTART command must be installed outside the danger area in a
position where the danger area and the entire work area concerned are
clearly visible.

It must not be possible to reach the control from inside the danger area.
OUTPUTS
OUT STATUS
The OUT STATUS signal is a programmable digital output that can indicate
the status of:

An input.

An output.

A node of the logic diagram designed using the MSD.
OUT TEST
The OUT TEST signals must be used to monitor the presence of short-
circuits or overloads on the inputs.
OSSD (MODULE M1, MI8O2, MO2, MO4)
The OSSD (static semiconductor safety outputs) are short circuit protected.
They supply:

In the ON condition: Uv-0,75V ÷ Uv (where Uv is 24V ± 20%)

In the OFF condition: 0V ÷ 2V r.m.s.
The maximum load of 400mA@24V corresponds to a minimum resistive
load of 60

.
The maximum capacitive load is 0.68

F.
The maximum inductive load is 2mH.