25
18. Flip function
In the skater mode, the quadrocopter is able to fly lateral flips. You should fly the first flips outside when there is ab
-
solutely no wind. To do this, let the quadrocopter ascend to a safe altitude of approx. 2 m and then hover in position.
To switch the transmitter to flip mode, briefly press the
push button for the flip function (see also Figure 1, no. 2).
To signal that the transmitter has switched to the flip mode,
it continuously emits short beeps and the two LEDs on the
transmitter are flashing.
Now move the joystick for the pitch and roll function (see
also Figure 1, no. 4) quickly to the right or left and immedi-
ately return it to the middle position.
The quadrocopter will slightly increase the flight altitude
and then make the flip in the desired direction. After the
lateral flip, it will go again into the hover flight.
To be able to do another flip, push the button for flip mode
again.
The flip function is only available in skater mode. If the LEDs on the quadrocopter are flashing and thus
indicate the lower voltage level of the flight battery, the flip function is disabled.
19. Flying in automatic mode
The transmitter allows letting the quadrocopter automatically fly two different flying figures when a button is pressed.
Important!
Before you start an automatic flight figure, you must make sure that there is enough space for the flying
figures. Otherwise, the quadrocopter encounters an obstacle.
Figure 17
Содержание 2142121
Страница 1: ...Operating Instructions Electric quadrocopter Drone Copter 2 in 1 RtF Item no 2142121 ...
Страница 35: ...35 ...