21
f) Programming of “Roll”
Move the ROLL lever (see figure 12) to full deflec-
tion for ROLL LEFT and hold it there for at least
one second.
The QuadroCopter thus recognises the ROLL chan-
nel and memorises this. Move the ROLL lever back
to neutral position, continue to leave the THROT-
TLE on zero.
As confirmation, the QuadroCopter’s red LED goes
off and the green LED is lit permanently. This is the
end of the training process.
Disconnect the rechargeable battery from the
QuadroCopter and remove jumper “R2”.
Other possibly connected jumpers may be left
plugged in. This is the end of the programming proc-
ess for the channels.
Figure 12
Содержание QuadCopter 650 ARF
