26
5. Safety instructions
The guarantee/warranty will be void if damage is incurred resulting from non-compliance with
these operating instructions. We assume no liability for any consequential damage!
We do not assume liability for personal injury or material damage resulting from improper use
or disregarding the safety instructions! In such cases the warranty/guarantee is voided.
Normal wear and tear during operation (e.g. worn tires) is excluded from the guarantee and
warrantee, the same applies to accidental damage (e.g. broken transverse control arm, scratched
or destroyed vehicle body etc.).
Dear Customer, the following safety instructions are intended not only for the protection of the product,
but also for your own safety and the safety of others. Therefore read this chapter very carefully before
putting the product into operation!
a) General
Attention important notice!
Operating the model may cause damage to assets and/or persons. Therefore, you have to make sure
that you have sufficient insurance cover when operating the model, e.g. liability insurance. If you already
have a liability insurance, please inform yourself before using the model whether this is insured as well.
• The unauthorized conversion and/or modification of the product is inadmissible for safety and approval reasons
(CE).
• The product is not a toy. It is not suitable for children under 14 years of age.
• The product must not become damp or wet.
• Do not leave the packaging material lying around carelessly as it can become a dangerous toy for children.
• Should any questions arise that are not answered in the operating instructions, contact our technical support (see
chapter 1 for contact information) or another expert.
Operating and handling remote control model vehicles must be learned! If you have never steered such
a model, start especially carefully to get used to how it responds to the remote commands. Proceed
with patience!
b) Operation
• Whenever you use the product, first make sure that there are no other models operated on the same frequency
within the range of the transmitter. Control of the wireless models will be lost! Always use different frequencies.
• Before operation, forward and reverse trim settings as well as steering trim settings have to be checked and - if
necessary - adjusted.
This is why the wheels of the vehicle must not be placed on the ground yet when the vehicle is put into operation;
place the vehicle on a suitable object that allows the wheels to turn freely (do not touch the driving mechanism!).
