Reel FlexiMova mm F0K37 Series, Руководство по проектированию и установке

Страница: 57 / 84

8 Electrical connections
FlexiMova
®
mm - Design and Installation
57 of 80
8.5.2 Terminal blocks
Table 32 : Designation of the terminal blocks
Figure 29 - No. Designation
1 Power board terminal block
2 Control board terminal block
Table 33 : Control board terminal block
Terminals Signal Description Technical characteristics
C10 HW-STO
Safety Hardware Channel
STO digital input
ON ≥ 15 ÷ 30 VDC
OFF
≤
3 VDC
Impedance 2 kΩ
C9 +24 V User power 24 V +24 VDC - 150 mA MAX.
C8 GND Ground (0P) Zero reference of +24 V
C7 DICOM1 Digital input common
C6 DI-STO
Diagnostic Channel
STO digital input
Digital inputs
ON ≥ 15 ÷ 30 VDC
OFF ≤ 3 VDC
Impedance 2 kΩ
C5 DI4
Configurable digital input “D14”
C4 DI3
Configurable digital input “DI3”
C3 DI2
Configurable digital input “DI2”
C2 DI1
Configurable digital input “DI1”
C1 +24 V User power 24 V +24 VDC - 150 mA MAX.
B10 A01-GND Analog output 1 zero reference Zero reference of +24 V
B9 A01 Analog output 1
Configurable analog output
0-10 V / 4-20 mA / 0-100 kHz
B8 +24 V User power 24 V +24 VDC - 150 mA MAX.
B7 AIN2+
Differential analog input
AIN2
Differential analog input 2
0-10 V 4-20 mA
B6 AIN2-
Zero Differential analog
input AIN2 Zero Differential analog
input AIN2
B5 GND Ground Zero reference of +24 V
B4 +24 V User power 24 V +24 VDC - 150 mA MAX.
B3 AIN1+
Differential analog
input AIN1
Differential analog input 1
B2 AIN1-
Zero Differential analog
input AIN1 Zero Differential analog
input AIN1
B1 GND Ground
Zero reference of +24 V
A10 GND Ground
A9 NC2 Normally closed relay output 2 24 V - 1 A
A8 NO2 Relay output 2 normally open 24 V - 1 A
A7 COM2 Relay output 2 common Relay output 2 common
A6 +24 V User power 24 V +24 VDC - 150 mA MAX.
A5 GND Ground Zero reference of +24 V
A4 NC1 Relay output 1 normally closed 24 V - 1 A
A3 NO1 Relay output 1 normally open 24 V - 1 A
A2 COM1 Relay output 1 common Relay output 1 common
A1 +24 V User power 24 V +24 VDC - 150 mA MAX.
Note: 150 mA available for each +24 output pin for an overall total of 500 mA on all the outputs.