Reel FlexiMova mm F0K37 Series, Руководство по проектированию и установке

Страница: 33 / 84

6 Transportation – Storage - Disposal
FlexiMova
®
mm - Design and Installation
33 of 80
6.4 Disposal
The product is considered special waste due to some of its components
so the required disposal procedure is as follows:

Disassemble the product

Separate the recoverable materials such as :
 Aluminium

Plastic cover (recyclable plastic)
 Network impedance with copper windings

Copper wires for internal wiring
 Mechanical parts and metal

Electronics (boards and ventilation)
 Resins
Consequently dispose of in accordance with local or state regulations. The
electronic boards, the power components, the capacitors and the electronic
components are considered special waste.
7 Mounting instructions for the converter
7.1 General instructions
7.2 Mounting types
There are three possible installation methods for the product:
• Wall or machine mounted.
•
Motor mounted with an adapter
(specific for REEL SuPremE
®
motors).
•
Motor mounted (also on motors other than REEL SuPremE
®
) using the
purpose-made adaptation KIT (not available as an optional).
When selecting an installation site you must comply with the conditions set
out in
par. 7.2.1 .
If the product is installed outdoors, protect the product from direct sunlight
to prevent the formation of condensation on the electronic components.
Use of the product in ambient conditions other than those specified in the
manual must be assessed together with the Manufacturer .
ATTENTION
Prior to starting any mounting operations verify, in Table 5, the mass of your
FlexiMova
®
mm model, in order to determine the proper size of the fixings
and supporting structure for the product.
WARNING