13
4. The meter will format the SD card and automatically return to the
Setup menu when formatting is complete.
Note:
At any time, you can press the
ESC
button to exit the Setup mode
and resume normal operation. It is recommended that new SD cards
should be formatted prior to first use. If the formatting process fails or if
no card is inserted, the meter will display "CArD Empty".
Setting the Time and Date (dAtE)
Follow steps 1 through 4 when "dAtE" appears on the LCD.
1. Press the and buttons to adjust the year as indicated by "YY."
2. Press the
ENTER
button to confirm selection.
3. Repeat steps 1 and 2 for month, day, hour, minute and seconds as
indicated by (mm/dd/h/m/s).
4. Press the
SET
button to save the time stamp and skip to
next parameter.
Note
: At any time, you can press the
ESC
button to exit the Setup mode
and resume normal operation. The internal clock will keep accurate time
when the meter is powered off. When new batteries are installed the clock
will have to be reset.
Setting the Data Logging Sampling Rate (SP-t)
Follow steps 1 through 4 when "SP-t" appears on the LCD.
1. The sampling rate can be set from "0" seconds (manual log mode
only) up to 8 hours, 59 minutes and 59 seconds.
2. Press the and buttons to adjust the required sampling rate by
hours, minutes or seconds as indicated by (h/m/s).
3. Press the
ENTER
button to confirm each selection.
4. Press the
SET
button to save the selected sampling rate and skip to
next parameter.
Note:
At any time, you can press the
ESC
button to exit the Setup mode
and resume normal operation.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
