12
Setup Mode
1. Press and hold the
SET
button for 2 seconds to enter Setup Mode.
2. Press the
SET
button continuously to scroll through the
following parameters.
Parameter Description
Sd F
Format the SD memory card
dAtE
Set the time and date
SP-t
Set the data logging sampling rate
PoFF
Enable or disable the auto-power off function
bEEP
Turn the beeper on or off
dEC
Set the decimal format (USA (20.00) or European (20,00))
t-CF
Select the temperature unit of measure (°C or °F)
AL
Set alarm value
HIgh
Set CO
2
height compensation value in meters (CO
2
mode only)
HIghf
Set CO
2
height compensation value in feet (CO
2
mode only)
ESC
Exit Setup mode
3. Once the appropriate parameter has been selected, follow the
instructions below.
Note:
The meter will automatically exit out of the mode if no key is
pressed within 7 seconds.
Formatting the SD Card (Sd F)
Follow steps 1 through 4 when "Sd F" appears on the LCD.
1.
Press the and buttons to select "YES" to format the card. Select
"nO" to abort.
2. Press the
ENTER
button to confirm selection.
3. Press the
ENTER
button again to re-confirm.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
