background image

13

Accessories and Replacement Parts 

• 

FC-300

 Fused Test Lead Set

• 

R1000

 Safety Test Lead Set, Double Insulated

• 

CA-05A

 Soft Carrying Case

• 

C-820

 Soft Carrying Case

Don't see your part listed here? For a complete list of all accessories and 
replacement parts visit your product page on www.reedinstruments.com.

Product Care

To keep your instrument in good working order we recommend the following:
•  Store your product in a clean, dry place.
•  Change the battery as needed. 
•  If your instrument isn't being used for a period of one month or longer 

please remove the battery.

•  Clean your product and accessories with biodegradable cleaner. Do not 

spray the cleaner directly on the instrument. Use on external parts only.

Product Warranty

REED Instruments guarantees this instrument to be free of defects in 
material or workmanship for a period of one (1) year from date of shipment. 
During the warranty period, REED Instruments will repair or replace, at no 
charge, products or parts of a product that proves to be defective because 
of improper material or workmanship, under normal use and maintenance. 
REED Instruments total liability is limited to repair or replacement of the 
product. REED Instruments shall not be liable for damages to goods, 
property, or persons due to improper use or through attempts to utilize the 
instrument under conditions which exceed the designed capabilities. In 
order to begin the warranty service process, please contact us by phone at 
1-877-849-2127 or by email at [email protected] to discuss the 
claim and determine the appropriate steps to process the warranty.

 

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Содержание R5800

















Отзывы: