Customization Panel, Type A
•
Outside dimensions (W x D mm): 135 x 85
•
Additional customization panel to the use cases
5690-Axxx
[Figure 3-2] Type B, IO Module mounted on the left side
Blank Module, Type B
•
Outside dimensions (W x D mm): 102 x 80
5600-2000
RF N Type Module, Type B
•
Outside dimensions (W x D x H mm): 102 x 80 x 22
•
Connector: 2 x N(F) outside to SMA(F) inside
• Unused RF ports must be covered with caps, and please use
shielded cables to ensure shielding effectiveness.
5630-1000
RF SMA Module, Type B
• Outside dimensions (W x D x H mm): 102 x 80 x 13
• Connector: 2 x SMA(F) outside to SMA(F) inside
• Unused RF ports must be covered with caps, and please use
shielded cables to ensure shielding effectiveness
5630-2000
D-Sub 9Pin Module, Type B
• Outside dimensions (W x D x H mm): 102 x 80 x 24
• DB 9P(M) outside to DB 9S(F) inside 5,000pF Pi Filter
• Unused ports must be covered with a cap, and please use
shielded cables to ensure shielding effectiveness
5640-2000
Customization Panel, Type B
•
Outside dimensions (W x D mm): 102 x 80
•
Additional customization panel to the use cases
5690-Bxxx
Other accessories
IO USB 3.0 to 2.0/3.0 HUB
• Dimensions (W x D x H mm):
94 x 63 x 22
•
IO Port: 1 x USB 3.0 to 1 x USB 2.0 and 3 x USB 3.0
•
IO Port: 1 x DC IN (12V to 24V)
•
1 x DC Plug to DC Plug cable included
•
1 x USB A(M) to USB A(M) cable included
•
This hub can be used inside the enclosure with the
5640-1000, and both USB 3.0 and USB 2.0 are available
5640-1100
RedwoodComm Co., Ltd. |
RWC7100A Operation Manual
Page 13 of 16
