X-IP-SERIES USER MANUAL
14
6.1.1.1.2
CONTROLS POPUP
Open a floating controls window for PTZ control of the camera.
6.2 PRESET
POSITIONS
Speed limit controls the speed at which the camera moves to preset positions under user control. Movement during
tours and for alarms is configured separately.
6.2.1 EDIT
PRESETS
Edit preset information for selected preset:
•
Name – allows the user to give the preset positions a name or description.
•
Daytime profile - allows the user to define which camera profile is active at this preset position when the camera is in “Daytime”
mode. This allows greater flexibility, for example if one preset is looking into an area of low light, the default profile may be
over-ridden at this position to enhance visibility.
•
Night profile – allows the user to define which camera profile is active at this preset position when the camera is in “Night” mode.
•
Set / Update – sets the selected preset at the current camera position.
•
Delete – Deletes the preset information.
•
Go to – Moves the camera to the selected preset position.
6.3 PATROL
TOURS
6.3.1
RUN/STOP TOUR
This allows the user to select a tour & run it, or stop a currently running tour. Any user joystick / PTZ activity will cancel a
running tour. Restore action may (if configured) automatically resume a tour after a period of no user in put.
6.3.2
EDIT TOUR
To edit a tour, select the tour number from the sidebar – the tour settings will be populated in the page.
6.3.2.1
NAME
Allows the user to set a name or description for the patrol tour.
6.3.2.2
AUTO-POPULATE TOUR LIST
If the “Auto-populate list” option is selected, the tour list will be automatically populated with all currently set preset positions.
This is useful for quickly setting up a patrol tour.
If the “Clear list” option is selected, the tour list will be cleared (all positions set to “no preset”).
6.3.2.3
SPEED
Selects the speed at which the dome runs between tour positions.
6.3.2.4
DWELL
Sets the period of time (in seconds) the dome spends at each position before moving to the next.
6.3.2.5
ORDER
Controls the order in which the dome visits each entry on the tour list, options are:
•
Forward - The dome runs through positions in order “1, 2, 3…” etc., looping back to the 1st entry on reaching the end of the list.
•
Ping-Pong - The dome runs through positions in order “1, 2, 3…” etc. On reaching the end of the list it runs back through the
list in reverse order “…3, 2, 1, 2, 3…”
•
Random - The dome randomises the order of the list before running through all positions. The dome is guaranteed to visit each
position exactly once per loop. The list order is re-randomised each time round.
6.3.2.6
TOUR LIST
Here you can manually modify the tour list, selecting a preset for each entry in the list. To remove an entry, simply select
“[No preset]” from the drop-down list for that entry. Preset positions which have not been set will be ignored.
Содержание RVIP Series
Страница 28: ...X IP SERIES X IP SERIES USER MANUAL...