Redvision RVIP Series, Руководство пользователя, Страница: 12 / 28

FIXING
POINTS x4
ALARM/WASH/
AUX RELAY
OUTPUTS
ALARM
CONFIG
SWITCHES
ALARM
INPUTS
CAMERA
CONNECTION
NETWORK
CONNECTION
X-IP-SERIES USER MANUAL
8
PCB IDENT DESCRIPTION
* F1 Mains input fuse 3.15A - Anti Surge *
F2 Camera fuse 3.15A - Fast Blow
3.2.3 FUSE PROTECTION
3.2.4 ALARM CONFIGURATION SWITCH SETTINGS
Switches S1 & S2 are used to configure each alarm input channel as Normally Open (N.O.) or Normally Closed (N.C.)
3.3 WIRELESS ALARM PSU (RVIP-PSU-ALM-W)
In each case, set the switch to ON for Normally Open operation, and OFF for Normally Closed.
NOTE: Where fitted, it may be necessary to remove the Wireless add-on card in order to gain access to the S2 switch
for configuration. Ensure that power is disconnected from the PSU module before removing the wireless card.
POSITION SWITCH S1 SWITCH S2
1
Alarm 1 Alarm 9
2
Alarm 2 Alarm 10
3
Alarm 3 Alarm 11
4
Alarm 4 Alarm 12
5
Alarm 5 Alarm 13
6
Alarm 6 Alarm 14
7
Alarm 7 Alarm 15
8
Alarm 8 Alarm 16
WARRANTY & SAFETY NOTICE:
DISCONNECT ALL POWER
BEFORE OPENING OR WORKING
ON THE RVIP-PSU-ALM16
POWER SUPPLY UNIT WITH
EMBEDDED ALARM CARD.
THIS PROTECTS HIGH VOLTAGE
COMPONENTS. INSTALLATION
MUST BE CARRIED OUT BY A
SUITABLY QUALIFIED PERSON.
WIRELESS
CARD