REDT Miracle-A6, Инструкция по эксплуатации

Страница: 70 / 83

- 69 - MIRACLE-A6
Used only for the tip align key. It automatically measures length of the key.
(When the key does not touch the Stopper because it is too short, you can use this
function to ensure accurate key cutting.)
In this case, you may not need to use the Stopper.
Used only for the tip align key.
It automatically measures length and center of the key.
3) Cutter Setting
- You can assign thickness of the Cutter.
Press the button to select the desired Cutter thickness. Cutter setting range is from 1.5mm to 2.4mm.
4) Cutting Depth Setting
- For Laser Key cutting, you can assign cutting depth.
Press the button to select the desired cutting depth in the range of 0.9mm ~ 1.5mm.
5) Multi-Stage Cutting Count
- For Laser Key cutting, you can select the desired button to make cutting in multiple stages.
Press the button to assign the cutting stage up to 3 counts.
6) Trim
- Press the button to trim the key after cutting.
~
~