REDT Miracle-A6 Скачать руководство пользователя страница 6

Страница: 6 / 83

- 5 -

MIRACLE-A6



Cautions for Safety

Make sure to observe the followings for safe use of the product.



The below information is provided for user safety and to prevent personal injury or property damage.



Read the below cautions carefully.

Indicates that you may get injured or experience equipment damage if you fail to follow the

instructions.

Indicates that you could be seriously injured if you fail to follow the instructions.



Cautions for Power

Never use damaged or defective power

cords or loose plugs or sockets.



They may cause electric shock or

fire.

Never plug too many power cords into

an outlet simultaneously. The outlet

may get too hot and cause fire.

Never pull the plug out by tugging on

the power-cord, or touching the power

plug.

Keep the machine unplugged not using

it for a long time.

If smoke rises up while using the

machine, turn off the power right away.

Contact user`s dealer or our factory

for advice.

Cigarette jack fuse may blow out when

you connect the machine to the vehicle

cigarette jack. In such a case, replace

the old fuse with a new fuse 10A or

greater. You can only use the machine

connected to the cigar jack while the

vehicle engine is running.



Cautions for Installation

Do not install the machine in a place

with oil, smog, moisture, dust or water

splashing.



It may cause electric shock or fire.

Do not put burning cigarettes or

candles on the machine. Keep it away

from

heating

apparatus such

stoves.

The

unit

could

get

overheated,

resulting in failure or fire.

Make sure to install the main body on

a stable flat surface.

The machine weighs about 21.5Kg and

generates vibration on both sides

during operation. If you use the

machine on a weak, wobbly, or bumpy

surface, it may lead to damage on

machine/worktable or injury

Содержание Miracle-A6



















































































Результаты поиска

Содержание Miracle-A6

Отзывы:

Похожие инструкции для Miracle-A6

Бренды по названию

Популярные бренды

REDT Miracle-A6, Инструкция по эксплуатации

Результаты поиска

Содержание Miracle-A6

Отзывы:

Похожие инструкции для Miracle-A6

Бренды по названию

Популярные бренды