REDT Miracle-A6, Инструкция по эксплуатации

Страница: 36 / 83

- 35 - MIRACLE-A6

Before using the clamp, be sure to set up the origin in advance.

If the distance between Decoder and Cutter is automatically measured, be sure to replace the
Cutter with Decoder.

The origin of clamp cannot be measured by Cutter.
◈
Auto Setting
1. Press [Menu] button.
2. Press button to select [2. Clamp Origin] and press [Enter] button.
3. Select Clamp and press [Enter] button.
4. Select [1.Auto ] and press [Enter] button.
5. Fix the center measuring bar as given when this product is delivered or a laser key whose side is flat to
the top of the clamp and press [Enter] button. For laser keys, make sure to use an end-reference key.
6. If [Enter] button is pressed, the decoder will sense the key fixed to the clamp and measure
the Origin of the clamp automatically.