REDT Miracle-A6 Скачать руководство пользователя страница 83

Страница: 83 / 83

- 82 -

MIRACLE-A6

Warranty

Product: Desktop CNC Cutter

Model: Miracle-A6

The manufacturer’s warranty lasts for 12 months from the purchase date and the below

is the warranty details.

Warranty Details

1. Warranted Product: Miracle-A6

2. Warranty Period: 12 months from the purchase date. However, if it is unable to confirm the

purchase date, 13 months from the manufactured date is the warranty period.

3. Paid Service during Warranty Period

①

Product breakdown caused by natural disaster (fire, salt damage, gas, earthquake, storm

and flood damage)

②

Replacement of consumables that naturally wear out

③

Product breakdown caused by power failure and poor connecting device

④

Product breakdown caused by exterior factors, not by the product itself

⑤

Product breakdown caused by repairing or remodeling by other personnel, not by RED

Technology engineer

⑥

Product breakdown caused by intentional or accidental mistakes of customers

4. Free Service

①

In case of product breakdown caused by other factors than the factors described in the paid service

section during the above mentioned warranty period

5. Shipping in case of Product Breakdown

①

In principle, the product should be shipped to RED Technology for repair

②

During the free A/S period, the product shipping cost shall be paid by RED Technology.

③

After the free A/S period, the product shipping cost shall be paid by the customer.

④

The shipping cost of product without defect shall be imposed to the customer.

6. RED Technology is exempted from all obligations and accountabilities for the product sold to other countries

without a clear export contract with the company.

7. For the matters unstated in this Warranty,

『

Consumer Injury Compensation Rule

』

shall be

observed.

RED Technology

1314 3F Gwanpyeong-dong Yusung-gu Daejeon-si

Customer Service Phone: 1599-5042 Fax: 042-673-0905

Homepage: www.iredt.com

Customer

Information

Model:

Purchase Date:

Name:

Business:

Address:

Phone:

Dealer

Information

Name:

Business:

Address:

Phone:

Содержание Miracle-A6



















































































Результаты поиска

Содержание Miracle-A6

Отзывы:

Похожие инструкции для Miracle-A6

Бренды по названию

Популярные бренды

REDT Miracle-A6, Инструкция по эксплуатации

Результаты поиска

Содержание Miracle-A6

Отзывы:

Похожие инструкции для Miracle-A6

Бренды по названию

Популярные бренды