REDSTONE 72274475, Инструкция по эксплуатации

Страница: 19 / 44

19
DRY WALL SANDER
from the Sanding Head.
• Installation of a new Brush Skirt is basically
the reversal of the removal process.
• During installation of a new Brush Skirt
take care to not over tighten the eight
(8) self tapping screws. These should be
firmly tightened but be careful not to strip
the threads within the tapped holes.
• Reinstall the Sanding Pad on the motors
drive spindle and secure in place with the
Hex Headed Socket Screw.
Note:
Changing the Brush Skirt will expose
the interior of the Sanding Head. The operator
should take the opportunity to examine,
clean and remove any debris from within the
Sanding Head, or from the exhaust ports and
exhaust tubes fastened or contained within it.
ENVIRONMENTAL PROTECTION GB
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice.
www.leroymerlin.fr
Fig. 20