REDSTONE 72274475, Инструкция по эксплуатации

Страница: 13 / 44

13
DRY WALL SANDER
• Tighten the sleeve nut to secure the
Extension Tube and ferrule into their
service positions.
(Fig. 5)
• Fit the ‘D’ handle clamp around the
Extension Tube.
Note:
This clamp is hinged. By removing the
pinch bolt
(Fig. 6)
the clamp can be ‘opened’
and placed around the Extension Tube.
The clamp can then be ‘closed’ around the
Extension Tube, the pinch bolt replaced and
tightened to secure the clamp in place.
• Fit the ‘D’ handle to the clamp using the
two (2) socket headed hex screws.
Note:
We recommend that the ‘D’ Handle
clamp is positioned directly behind and is
touching the Extension Tube ferrule. This
locates the ‘D’ handle in the most convenient
position for the majority of operators.
Note: The design of the ‘D’ handle is such
that ergonomic positioning of the handle
on the clamp is possible. This ensures
comfortable operation for both right- handed
and left- handed users.
• Insert the Flexible Extraction Hose fully into
the end of the Extension Tube and tighten
the sleeve nut to secure it in place.
(Fig. 7)
• The ‘free’ end of the Dust extraction Hose
can now be connected to a suitable dust
extraction and collection machine.
Note: Follow the instructions provided by
the manufacturer of the dust extraction
machine being used.
Note
: A selection of Hose End Connectors
is provided. These should ensure that
this machine can be connected to
most commercially available dust
extraction machines.
To Change a Hose End Connector
• Locate the two (2) ‘lugs’ which fit into
the two (2) ‘notches’ in the Hose End
Mounting Ring.
• Using a flat bladed screwdriver, gently and
carefully press the ‘lugs inwards, and at
the same time ease the Mounting Ring
away from the Hose End Connector. The
Hose End Connector will release from the
Mounting Ring.
• Snap a new Hose End Connector onto the
Mounting Ring.
• Check that the ‘lugs’ have deployed into
the ‘notches’.
Fig. 5
Fig. 6
Fig. 7
www.leroymerlin.fr