REDSTONE 72274475, Инструкция по эксплуатации

Страница: 12 / 44

12
SHORT REACH MODE
WARNING: Only conduct the following
procedures with the machine disconnected
from the main power supply.
Fitting the Flexible Dust Extraction Hose.
• Loosen the sleeve nut.
(Fig. 1)
• Insert the Flexible Dust Extraction Hose into
the machines main dust extraction tube/
handle, and push it fully ‘home’.
(Fig. 2)
• Tighten the sleeve nut to fasten the
Flexible Extraction Hose into the machine.
Note: The integral protection stand allows
the machine (when not in use) to be stood
upright against a wall or similar. The Flexible
Hose is protected from being crushed or
kinked by the stand.
(Fig. 3)
LONG REACH MODE
• Loosen the sleeve nut.
(Fig. 1)
• Remove the Flexible Dust Extraction Hose
if fitted.
• Slide the Extension Tube into the machines
main dust extraction tube/handle.
Note: The Extension Tube which slides into
the main dust extraction/handle of the machine
has a slightly oval cross-section. To help
insertion and correct location of the Extension
Tube, gently rotate it as you push it into place.
• Slide the Extension Tube into the main
dust extraction/handle until the 1.9m
pictogram just disappears from view.
• Slide the Extension Tube Ferrule up and into
the main extraction tube/handle.
(Fig. 4)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
ASSEMBLY
GB
www.leroymerlin.fr