8
3.0 GENERAL CONTROLS
In fig.2. some key details of the machine are shown, as follows:
1
Steering wheel when seated on the machine.
2
Manual steering handle, when walking in front of machine.
3
Dead men’s lever. When not squeezed engine will die, or not run.
4
Lever to raise and drop Verti-Drain unit. When machine is lowered, the drive clutch to Verti-
Drain will engage automatically.
5
Decall for instructions on handle 4
6
Gear shift lever. Shift ONLY when fully disengaged, otherwise damage may occur. When it
doesn’t want to shift, drive on a little.
7
Decall for gear setting.
8
Decall for explaining the working of the main clutch.
9
Lock pin for manual steering handle
10
Clutch lever to be used in combination with walking in front only, or as parking brake.
11
Foot main clutch lever when sitting on the unit.
12
Electronic hour and rpm meter.
13
Tank tap
14
Choke
15
Hand start. Can be used independently from electric start, or when electric start doesn’t work.
Squeeze safety switch on manual steering handle, otherwise it will not start.
16
Throttle. Engine is adjusted at 3000 rpm. Never adjust a higher rpm. Damage may occur
17
Start key.
18
Working depth indicator. (Indication related to 150 mm [6”] long tines).
16
17
14
15
13
Fig.2
RD
24
22
23
19
3
26
1
2
4
8
9
11
5
6
7
10
12
25 Foot brake
19
21
18
27 Parking brake
20
