13
Vibration during work
Machine not stable on the ground
Machine out of balance
Drop machine fully on the ground.
Reduce working depth
Use other thinner tines
Check crankshaft timing
Rear wheels slip
During work
During transport
Too wet
Too undulated
Not enough weight on machine. Use
spring force from second rod
alongside hydraulic cylinder.
Check circumstances
Drive hill other way round.
V-belts slip
V-belts worn
V-belt tension not okay
Overload of drive
Replace V-belts
Check pre-tension
Reduce
10.0 MAINTENANCE.
Pre-Delivery-Inspection
Check oil level engine
Check hydraulic oil level
Fill battery and charge
Assemble tines
Check fuel level
Check electric system
4 hours @ 3 Amp
Use regular unleaded
After first 20 hours
(new or repaired)
Grease roller bearing
Check bolts/nuts
Look closely at machine
Renew engine oil
Check oil levels
4 shots each EP 2
Check engine manual
After every 100 hours
Grease roller
Check bolts/ nuts
Look closely at machine
Grease spindles front roller
Renew engine oil
Grease chain drive rear wheel
4 shots each EP 2
After every 500 hours
Renew hydraulic oil
