12
8.0 TRANSPORT OF VERTI-DRAIN
The Verti-Drain can not be used for transport along public streets. Put the Verti-Drain on a trailer.
Use a safe trailer system to drive the Verti-Drain on and off. On slopes and undulated areas,
reduce the transport speed of the Verti-Drain. Be aware that the Verti-Drain can roll-over, if unit
is not properly driven.
.
9.0 PROBLEM ANALYSIS
Engine does not start
Battery low
Wiring damaged
Clutch pedal switch
Check battery condition
Recharge battery
Check wiring for short-cuts
Check battery connectors
Clutch pedal not disengaged
Clutch pedal switch damaged
Engine does not run
No fuel
No ignition
Check fuel level
Use choke
Sit on seat or squeeze dead men’s
handle.
Check switches
Check wiring system
Clutch is not working
Check pedal stroke
Friction plates are glued together
And clutch will not relieve
Clutch slips
25mm 1” free play
Check bolts in main clutch
Check main clutch control
rods/levers
Lining plates worn
Lining plates dirty
Clutch springs weak
Overload
Hydraulic failures
Leakages
No pressure (lift capacity)
Verti-Drain will not drop
Check components
Pump damaged
Not enough oil.
Relieve valve not properly set
No drive of pump
Engine not running
Check safety bar alongside
hydraulic cylinder
Forward movement
Hard shifting gears
Parking brake does not work
Check gear shift control rod/ levers
Gears are under pressure, relieve
clutch
Check brake adjustment
Brake linings worn out
Check rods/levers
