Redexim Turf-Stripper 1200, Руководство пользователя и каталог запчастей, Страница: 21 / 26

21
14.2 ADJUSTING THE TENSION OF THE V-BELTS
Figure 14
The Turf-Stripper is standard equipped with adjustable tension pulleys that keep the V-belts
taut.
Depending on the intensity of using the machine, the driveline could be affected by wear and
tear.
These V-belts should then be tightened.
Adjustment is carried out as follows
(see Figure 14)
:
!! Make sure that the Turf-Stripper is blocked well and cannot move on
its own accord !!
!! Make sure that the PTO is detached from the Turf-Stripper !!
1. Remove the safety guard (1).
2. Check the tension of the V-belt by pushing point A with a pressure of 7.5 kg
(16.5 lbs).
The stretch should be 12.4 mm (0.27”). (Per belt)
Go to point 8 if the tension is correct and go to point 3 if the tension should be
adjusted.
3. Loosen the lock nut (3).
4. Loosen bolts (2) so that the tension arrangement can rotate. (Both sides of
bearing bridge)
5. Adjust the lock nut (3) and use it to adjust the tension of the V-belts.
6. Tighten the lock nut (3).
7. Tighten nuts (2). (Both sides of bearing bridge)
8. Put the safety guard back in its place.