Redexim Turf-Stripper 1200, Руководство пользователя и каталог запчастей, Страница: 19 / 26

19
14. MAINTENANCE
Time schedule Check / Grease point Method
Before every use
-
Check for loose bolts / nuts.
-
Check the oil level in the
gearbox.
-
Presence and readability of the
safety stickers
-
Loose hanging parts around the
PTO
-
Check for hydraulic defects.
-
Check for cracks/defects in the
transport belts.
-
Tighten loose bolts / nuts with
the correct tightening moment.
-
Use SAE140.
-
Replace these if not present or
damaged.
-
Tighten the parts so that they
cannot reach the PTO.
-
Repair or replace, if needed.
-
Repair or replace, if needed.
After every use
-
Clean the machine.
-
Grease the rotor bearings.
-
Watch out for the bearings if a
high-pressure sprayer is used.
-
1 shot EP2 (see Figure13)
After the first 20
working hours (new
or repaired)
-
Lubricate the PTO and roller
bearings.
-
Check for loose bolts / nuts.
-
Check the oil level in the
gearbox.
-
Check the gearbox for oil leaks.
-
Loose hanging parts around the
PTO
-
Check the tension of the V-
belts.
-
Use EP2 grease
-
Tighten loose bolts / nuts with
the correct tightening moment.
-
Use SAE140.
-
Repair the leaks / damaged
parts.
Replace the seals / sealing
paste.
-
Tighten the parts so that they
cannot reach the PTO.
-
If needed, adjust the tension
(see Section 13.2).
Every 50 working
hours
-
Lubricate the PTO and bearings
of the machine.
-
Check for loose bolts / nuts.
-
Check the oil level in the
gearbox. It has to reach at least
the halfway mark of the gauge.
-
Check the gearbox for oil leaks.
-
Loose hanging parts around the
PTO
-
Check the tension of the V-
belts.
-
Use EP2 grease (see Figure
13)
-
Tighten loose bolts / nuts with
the correct tightening moment.
-
Use SAE140.
-
Repair the leaks / damaged
parts.
Replace the seals / sealing
paste.
-
Tighten the parts so that they
cannot reach the PTO.
-
If needed, adjust the tension
(see Section 13.2).
After every 500
working hours
-
Change the oil in the gearbox.
-
Use SAE140.