Redexim Rink 1500, Руководство пользователя и каталог запчастей

Страница: 6 / 14

- 6 - H1500
BRIEF DESCRIPTION
The RINK – Roller Spreader H1500 is exclusively designed for spreading fine-grain, loose
gritting material such as sand, gravel, rubber granules or similar. The spreading unit of the
RINK – Roller Spreader H1500 is driven by a V-belt. The spreading thickness is adjusted
via a mechanical slider. This allows the gritting material to be dosed accurately.
TECHNICAL DATA
Dimensions of the RINK – Roller Spreader H1500
Length ........................................................................................ 1.85 m
Width .......................................................................................... 1.60 m
Height ......................................................................................... 1.10 m
Load quantity ........................................................................... 0.40 m
3
Weights
Permissible total weight ............................................................. 750 kg
Dead weight ............................................................................... 180 kg
Layer width ................................................................................. 1.50 m
Tires .......................................................................................... 4 x wheels 13x6.50-6 4PR
Tire pressure ............................................................................ 1.50 – 1.75 bar
The identification plate is located on the right-hand side, on the front of the
spreader, in the direction of travel.
FIRST START-UP
- Retighten wheel nuts.
- Check tire pressure.
Recheck these points after the first travel with load !
OPERATION
BEFORE EVERY TRAVEL:
- Check
the RINK – Roller Spreader H1500 for visible defects and, if necessary, rectify them.
- Check the tire pressure.
Loading
-
Observe the desired maximum ground pressure.
- When loading, pay attention to the permissible total weight.