H1500
- 7 -
Attachment and Detachment
In order to obtain the best spreading results, the
RINK – Roller Spreader H1500
must be
mounted as parallel as possible to the ground. To do this, proceed as follows:
- When the screw (7) and the nut (8) are removed, the drawbar (1) can be pulled out to the
required length.
- Adjust the trailer hitch (2) to the height of the towing vehicle by loosening the screws (9)
and nuts (10) in position (A) or (B).
- Remove bolt (5) and linchpin (6) to be able to hook the trailer. After the machine has
been hooked to the towing vehicle, install the bolt (5) and secure it with the linchpin (6)
- By releasing the star knob (11), the holder for the rope hoist (3) can be precisely
adjusted.
- It is also possible to attach the drive lever brake (4) directly to the towing vehicle. To do
this, loosen the star knob (12) and attach the plug brake lever to the towing vehicle. Then
fully turn in the star knob (12).
Detach in reverse order !
Fig. 1: Attachment and Detachment
12
4
3
A
B
7
8
11
1
9
10
2
6
5
2
