Redexim Rink 1500, Руководство пользователя и каталог запчастей

Страница: 14 / 14

- 14 - H1500
Operating the extra brush
Turn the extra brush downwards to work the spreading material into the surface.
Raise the brush during transport and reversing !
Fig. 8: Operating the extra brush
Replace the sweeper bar
Depending on the load and operating time of the
RINK – Roller Spreader H1500 , the
sweeper bar (3) (s. page 13) can wear out. For replacement proceed as follows:
-
Remove the brush lever (1). (See page 13)
- Remove the sweeper bar (3) from the brush lever (1). (See page 23)
- Centre the new sweeper bar (3) on the brush lever (1) longitudinally and transversely,
and fix in place with screw clamps. (See page 23)
- On the brush lever (1), at the brush side between the bristles, drill out holes of Ø 8.5 mm
for the sweeper bar (3). (See page 23)
- Be careful when drilling that no bristles are damaged.
- Then mount the sweeper bar (3) using screw (6), washer (12,13) and nut (9). (See page
23)
- Attach the brush lever to the container. (See page 13)
Bürste oben
Bürste unten
Brush Up
Brush Down