82
9.2.2
Fasten chopper (
A
) to the combine and gusset
support plate (
B
) - right side, with existing hardware:
- M12 x 120 flange bolts and flange nuts (
B1
) x4
- may have to pry the chopper top side plate to align and
install bolts through the holes
9.2.1
Install new gusset support brace (
C
) to left rear
side of combine, with existing hardware:
- M16 x 40 hex head bolt and washers (
B2
) x2
- do not tighten - leave loose
9.2.4
Ensure chopper is square to combine
- check distance from front - both sides
9.2.5
Hand tighten bolts
(B2)
and
(B1)
of the gusset
support brace
(C)
to the rear of the combine.
The bolts
(B2)
and
(B1)
will be Torqued after the jack
shaft is mounted and aligned in step
10.2.4
- both sides
9.2.3
Fasten chopper (
A
) to the combine and new
gusset support plate (
C
) - left side, with existing hardware:
- M12 x 120 flange bolts and flange nuts (
B1
) x4
- may have to pry the chopper top side plate to align and
install bolts through the holes
B2
C
B2
B1
B
A
B1
C
B2
9.2.6
Remove cross brace (
A2
) from front of chopper
- discard
Содержание Case IH AFX 120 Series
