55
6 Chaff and Internal Deflectors
6.1 Internal Deflector Installation
Parts List:
parts located in CS974BS box
hardware located in CS625S bag
CS170B
Internal Baffle Mount Plate
(A)
Qty 2
CS921B
Internal Fin
(B)
Qty
2
Plan View
Case IH Internal Chopper
Redekop Straw Chopper
300mm
(12”)
150mm (6”)
INTERNAL DEFLECTOR SETTING
The internal deflectors (
B
) are used to adjust and
distribute straw evenly into the Redekop Straw
Chopper
6.1.1
Mount baffle mount plates (
A
) flush with top
of pan (
C
) with:
- M10 x 20 flange head bolt and flange nut x4
6.1.2
Mount deflector fins (
B
) to 2nd inside
mounting hole on mounting plates (
A
) with:
- M10 x 20 round head bolt and flange nut (
B1
) x4
6.1.3
Adjust angle of deflector fins (
B
) starting
with deflectors set as shown:
- position left deflector aimed 150mm (6”) inwards
to left rear of chopper
- position right deflector aimed 300mm (12”)
inwards to left rear of chopper
This is the typical layout for most applications.
Adjust angle, spacing of deflector to obtain even
distribution
- Check distribution by windrowing. If
the swath is even, the distribution into the straw
chopper will be even
NOTE:
Residue must be evenly distributed across the
width of the chopper.
Each user may be required to adjust the
angle of fins or fin type due to different crop
conditions or combine performance.
B
A
C
A
B
Содержание Case IH AFX 120 Series
