REDCAT Kaiju, Руководство пользователя, Страница: 15 / 53

WARNING:
To avoid short circuits, ensure that all wires & connections are well insulated and there is proper contact at all connections. Read through
the entire manual before operating and ensure all electronics are installed correctly. To avoid accidents, we recommend setting the
vehicle on a stand, with the tires free from any contact, while connecting and adjusting electronics. Stop usage and unplug the battery
immediately if the ESC exceeds 90ºC/194ºF as this may damage both the ESC and motor.
Disconnect the battery after use. The ESC continuously draws current from the battery (even if the ESC is turned off). If left plugged in
for long periods of time, the battery will completely discharge, which may result in damage to the battery or ESC. This WILL NOT be
covered under warranty.
FEATURES:
Completely water-proof and dust-proof.
(Remove the cooling fan when running car in wet conditions. If the ESC gets wet, clean and dry thoroughly to avoid damage from the
oxidation of copper connectors).
External Programming Port (EPP), easily connect to a program card, and also works as power port for cooling fan.
Excellent start-up, acceleration and linearity features.
The built-in switching mode BEC is powerful enough to supply all electronic equipment with a reliable power source.
There is a mounting stand for installing the ESC on chassis easily and firmly.
Proportional ABS brake function with 5 steps of maximum brake force adjustment and 8 steps of drag-brake force adjustment. Also
compatible with the mechanical disc-brake system.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked
protection.
Model:
Cont./Peak Current:
LIPO/NiMH Cells:
Applications:
Built in BEC:
Size / Weight:
Programming Port:
Motor Type:
Motor Limit:
Resistance:
WP-8BL150-RTR
150A/950A
8-18 Cells NiMH
，
3-6S LiPo
1/8 Touring Car, Truggy, Buggy, Monster Truck
6V/5A, Switch mode
59.5(L) × 48(W) × 42(H) / 178g
FAN / PRG Port
Sensored / Sensorless Brushless Motor (only in sensorless mode)
4S LiPo
：
4274 size motor
，
KV
≤
3000
6S LiPo
：
4274 size motor
，
KV
≤
2400
0.00035 ohm
Specs:
NOTE: The cooling fans of ESC is supplied by the built-in BEC, so it is always working under 6V .
RCR-2CENR RADIO SYSTEM
ESC
ESC GUIDE
TM
14