24 | Frequently Asked Questions
5 FREQUENTLY ASKED QUESTIONS
The LED is flashing Blue/Green, what does this mean?
A Blue/Green flash sequence indicates that the unit is in the process of calibration, as the unit
becomes more confident in it’s calibration the Blue will appear for longer. Continue driving and
eventually this will turn to a solid Blue.
Is the Tow‑Pro
®
Elite approved to use with the my Electronic Trailer Stability Control
system?
The Tow‑Pro
®
Elite is approved for use with the AL‑KO ESC and the DexKo Sway Control systems.
Visit the manufacturers website for more information.
How do I change from Proportional to User Controlled mode?
See
Section 3.3.3, "Changing Modes" (page 18)
Will it work with electric over hydraulic trailer brakes?
Yes, see
Section 2.2.3, "Wiring — Electric/Hydraulic Brakes" (page 11)
.
Can it be mounted in any orientation? How do I set the levelling of the main unit?
Yes, the unit can be installed inside the vehicle at any angle, provided it is firmly secured and in a
location which allows access to the intended remote head location. For more information, see:
•
"Mounting the main unit" on page 8
•
"Mounting the Remote Head" on page 13
•
"Mounting the Remote Head on a Dash or Console Panel" on page 14
My trailer is 3.5 tonnes fully loaded; Is the Tow‑Pro
®
Elite strong enough to stop
that much weight safely?
The controller is capable of supplying 3‑axle setups at 12 V inputs up to the maximum rated braking
ability of the brakes. You must also ensure that your trailer brakes are adequate for the trailer load.
Can the remote head cable be extended?
Yes, the remote head cable is a standard cable size that can be extended using
readily available cable.
Can the braking level of the manual over‑ride be adjusted?
Yes, the manual override can be adjusted whilst it is being applied by turning the gain control knob.
For more information on manual override, see
.
