18 | Operation
3.3.3 CHANGING MODES
Changing modes can only be completed with a trailer connected. Ensure the vehicle has come to a
complete stop before beginning the mode change process.
Changing between modes requires the user to complete the following process:
1
Rotate the knob fully counter‑clockwise.
2
Apply Vehicle Brakes.
3
Double‑click the knob
(two pushes within 1 second).
4
Release Vehicle Brakes.
NOTICE
If you are unable to change modes, check that the remote head is not installed into a panel
which is too thick and that the button is able to be depressed fully. Refer to
Remote Head on a Dash or Console Panel" on page 14
for details.
Ensure you reset the dial to a suitable braking level after changing modes.
