EXTERNAL RECORD
NOTE: The secondary LCD/EVF port and a MON-1 port cannot be used at the same time. Go to
.
You can record to an external recorder without recording to an SSD. To record to an external device only, follow the
instructions below:
1. Connect the camera to an external recorder with an HD-SDI cable.
2. Ensure the SSD is ejected.
3. Set up the HD-SDI output:
A. Go to Menu > Monitoring > Monitors and select a monitor.
B. Select Clean from the Mode drop-down menu (otherwise the external recorder records the overlay).
C. Select the output resolution from the Resolution drop-down menu.
NOTE: The HD-SDI maximum resolution is 1080p. For more information, go to
4. Disable all False Colors (otherwise the external recorder records the False Colors). For more information, go to
5. If monitoring audio via a third-party monitor that supports audio, set up the monitor mix:
A. Go to Menu > Settings > Audio > Mix > Monitor Mix.
B. Adjust the input channels.
6. Go to Menu > Settings > Recording > Mode.
7. Select External from the Storage drop-down menu.
8. Begin recording.
C OPYR I GH T © 2 0 2 0 R ED . C OM , L L C
9 5 5 - 0 1 9 2 _ V7 . 3 , R EV- A
|
3 7
RED RANGER GEMINI OPERATION GUIDE
