RED PERFORMA 25 Скачать руководство пользователя страница 6

Страница: 6 / 44

1-WARNINGS AND WARRANTY CONDITIONS

• Install the product in a location that does not present a fire hazard and is

equipped with power and air supplies and smoke outlets.

• In the event of fire in the chimney, turn off the device, disconnect it from the

mains electricity and do not open the hatch. Then contact the competent

authorities.

• The product and the cladding must be stored in a dry place and must not be

exposed to weathering.

• It is recommended not to remove the feet that support the product in order to

guarantee adequate insulation, especially if the flooring is made of flammable

materials.

• In the event of a malfunction of the ignition system, do not force it to light by

using flammable materials.

• Special maintenance must only be performed by authorised and qualified

personnel.

• Assess the static conditions of the surface on which the weight of the product

will rest and provide suitable insulation if it is made of flammable material (e.g.

wood, fitted carpet or plastic).

• Live electrical parts: only power the product once it has been fully assembled.

• Disconnect the product from the 230V power supply before performing any

maintenance operation.

• IF ANY SMOKE SPILLAGE IS SEEN WITHIN THE ROOM OR THE APPLIANCE

SUFFERS FROM AN EXPLOSIVE IGNITION PLEASE TURN OFF THE

APPLIANCE, VENTILATE THE ROOM AND CONTACT THE INSTALLER/

SERVICE TECHNICIAN IMMEDIATELY.

Содержание PERFORMA 25













































Результаты поиска

Содержание PERFORMA 25

Отзывы:

Похожие инструкции для PERFORMA 25

Бренды по названию

Популярные бренды

RED PERFORMA 25, Руководство по установке

Результаты поиска

Содержание PERFORMA 25

Отзывы:

Похожие инструкции для PERFORMA 25

Бренды по названию

Популярные бренды