94
127
123
119
2
6
7
8
29
6-HYDRAULIC CONNECTION
Technical Dept. - All rights reserved - Reproduction is prohibited
HYDRAULIC CONNECTION
IMPORTANT:
The connections depend on the type of System Configuration.
IMPORTANT!
If installing the boiler involves another pre-existing system complete with heating equipment (gas boiler, methane
boiler, fuel oil boiler, etc.), it is strongly recommended that you contact a qualified operator who subsequently will
be responsible for the compliance of the system with the applicable laws in force.
The Company will not be held responsible for damage to persons or things in the event of failed or incorrect operation
if the aforementioned warnings are not complied with.
IMPORTANT!!!
CLEAN THE ENTIRE SYSTEM BEFORE CONNECTING THE BOILER, IN ORDER TO REMOVE ALL RESIDUE AND DEPOSITS.
Upstream from the boiler, always install shutters so as to disconnect it from the plumbing system should it be
necessary to move it, or when it requires routine and/or special maintenance.
Connect the boiler using hoses so that the boiler is not too strictly connected to the system, and to allow slight
movements.
IMPORTANT!
The connection of the stove to the plumbing system must be carried out ONLY by specialized personnel who are
capable of carrying out installation properly, in compliance with current standards in the country of installation.
The manufacturer will not be held responsible for damage to persons or things in the event of failed operation if the
aforementioned warning is not complied with.
.
CONNECTION DIAGRAM WITH HYDRAULIC KIT FOR HEATING (SEE ACCESSORY CODE 40A16002)
2 - SAFETY VALVE
7 - HEATING DELIVERY
6 - HEATING RETURN
8 - SYSTEM FILLING WATER INLET
