RED DSMC Скачать руководство пользователя страница 5

DSMC POWER OPERATION GUIDE

COPYRIGHT © 2013 RED.COM, INC  

   955-0038, REV-A  

|

   5

SAFETY INSTRUCTIONS

 

DO NOT use near water. Avoid exposing to moisture. The unit 

is not waterproof, so contact with water could cause perma-

nent damage to the unit as well as electric shock and serious 

injury to the user. DO NOT use in the rain or under other condi-

tions with high moisture without appropriate protection, and 

immediately remove power source if exposed to moisture.

WARNING: 

To reduce the risk of fire or 

electric shock, do not expose to rain or 

moisture.

 

DO NOT expose to excessive vibration or impact (shock). Be 

careful not to drop. Internal mechanisms may be damaged by 

severe shock. 

 

Clean only using a dry cloth. When cleaning, remember that it 

is not waterproof and moisture can damage electronic circuitry. 

DO NOT rinse or immerse, keep dry at all times. DO NOT use 

soaps, detergents, ammonia, alkaline cleaners, and abrasive 

cleaning compounds or solvents. These substances may dam-

age lens coatings and electronic circuitry.

CAUTION: 

Proper ventilation requires a 

minimum 1/2" (1,25 cm) clearance be-

tween ventilation openings and exter-

nal surfaces. Verify that objects that can 

block the fan intake and exhaust ports do 

not impede airflow. Failure to permit ad-

equate airflow may result in overheating 

of the camera, degraded operation and in 

extreme situations, damage to the cam-

era.

 

DO NOT operate or store near any heat sources such as radia-

tors, heat registers, stoves, or any other apparatus that pro-

duce heat. Store in a protected, level and ventilated place. 

Avoid exposure to temperature extremes, damp, severe vi-

bration, strong magnetic fields, direct sunlight or local heat 

sources during storage. Remove any batteries from the camera 

before storage. Recommended storage and usage tempera-

tures are:

 

Operating range: 0°C to 40°C (32°F to 104°F)

 

Storage range: -20°C to +50°C (-4°F to +122°F)

If there are any performance issues when operating within this 

temperature range, please file a support ticket on 

support.red.

com

.

 

The Rear Modules are NOT HOT SWAPPABLE, meaning you 

cannot remove or install them while the camera is powered 

on. Before installing or removing any of these accessories, you 

MUST power down the camera. Failure to do so may result in 

damage to the accessory and/or camera BRAIN that will not be 

covered under warranty.

 

Do not bypass the third prong of the grounding-type plug on 

the power cord of the AC Power Adaptor. A grounding-type 

plug has two blades and a third “grounding” prong. The third 

prong is provided for your safety. A grounding-type plug shall 

be connected to an outlet with a protective earthen connec-

tion. If the grounding-type plug does not fit into your outlet, 

do not attempt to modify the plug or outlet, consult a qualified 

electrician.

 

Protect all power cords from being pinched, walked on or driv-

en over by a vehicle. Replace any power cords suspected of 

sustaining damage due to crushing or other forms of damage.

Products marked with this symbol are 

class 2 devices. These devices are not 

provided with a grounding type plug.

CAUTION: 

The power cord plug for the AC 

Power Adaptor is used as the power dis-

connect. To disconnect all power from the 

AC Power Adaptor, unplug the power cord 

plug from the wall outlet. During use, the 

power cord plug should remain easily ac-

cessible at all times.

 

Lithium-ion batteries may be subject to special handling re-

quirements pursuant to federal and local laws. Please refer to 

specific shipping instructions included with your battery re-

garding proper transport of your battery. Do not handle your 

battery if it is damaged or leaking. Disposal of batteries must 

be in accordance with local environmental regulations. For 

example, California law requires that all rechargeable batter-

ies must be recycled by an authorized recycle center. Storing 

batteries fully charged or in high temperature, conditions may 

permanently reduce the life of the battery. Available battery 

capacity may also be temporarily lessened after storage in low 

temperature conditions. 

WARNING: 

Do not expose the battery to 

excessive heat.

WARNING: 

Danger of explosion if an in-

correct battery is charged or used to pow-

er the camera and accessories. Replace 

only with the same or equivalent type bat-

tery.

CAUTION: 

Refer all service and repair to 

qualified RED service personnel. To reduce 

the risk of electric shock, and damage to 

the camera or accessories, DO NOT at-

tempt to perform any servicing other than 

any procedures that are recommended in 

the operating instructions.

INDOOR USE ONLY: 

Products marked with 

this symbol are designed for use indoors 

only.

Содержание DSMC



























































Отзывы: