manualshive.com logo in svg

RED DSMC, Руководство по эксплуатации, Страница: 19 / 58

Поделиться
Скачать
RED DSMC Скачать руководство пользователя страница 19

DSMC POWER OPERATION GUIDE

COPYRIGHT © 2013 RED.COM, INC  

   955-0038, REV-A  |   19

REMOVE DSMC MODULES

Use the instructions in this section to remove a PRO BATTERY MODULE.

WARNING:

 DSMC modules and adaptors are NOT HOT SWAPPABLE, meaning you cannot remove or install the 

modules while the camera is powered on. Before installing or removing modules, you MUST power down the 

camera. Failure to do so may result in damage to the modules or DSMC that will not be covered under warranty.

NOTE:

 The instructions below are applicable to all DSMC modules. The PRO BATTERY MODULE (QUAD) is 

shown in these instructions. If using the REDVOLT XL MODULE, ensure that the reversible switch plate is in-

stalled in the correct orientation for this attachment style.

REQUIRED TOOL:

 T20 Torx driver 

1.  Power down the camera.
2.  Use a T20 Torx driver to rotate the lock on the MODULE ADAPTOR counter-clockwise to the “Unlock” posi-

tion.

3.  Rotate the module upwards (as shown below) and away from the MODULE ADAPTOR to disengage the lip 

at the top of the module from the MODULE ADAPTOR.

4.  Fully remove the module from the DSMC BRAIN.

Remove Module

Содержание DSMC



























































Отзывы:

Нет отзывов