
COPYRIGHT © 2013 RED.COM, INC
DSMC POWER OPERATION GUIDE
955-0038, REV-A | 28
QUICKPLATE MODULE
The QUICKPLATE MODULE attaches to a +1 ADAPTOR MODULE or MODULE ADAPTOR to provide RED BRICK
power support for the DSMC BRAIN. Unlike the BACKPACK QUICKPLATE, this product does not require the
use of a LEMO connector cable or BACKPACK BASEPLATE. Plug the 6-pin AC power cable into the DSMC
BRAIN to keep the camera on while swapping batteries. The QUICKPLATE MODULE also features two (2) 2-pin
0B industry-standard auxiliary ports to power third party accessories.
NOTE:
The QUICKPLATE MODULE requires DSMC firmware v5.1.14 or later.
MOUNT QUICKPLATE MODULE
The QUICKPLATE MODULE attaches to a MODULE ADAPTOR or +1 ADAPTOR MODULE in the same way that
other DSMC modules attach. For more information about attaching DSMC modules, go to
.
QUICKPLATE MODULE Front
(left), and Rear (right)
QUICKPLATE MODULE