background image

15

 

 

 

 

2-INSTALLATION INSTRUCTIONS

Technical Dept. - All rights reserved - Reproduction is prohibited

DIMENSIONING

The drop in pressure (draft) of a flue depends on its height. Check the drop in pressure with the values indicated in the technical 

characteristics. The minimum height of the chimney is 3.5 meters.

The interior cross-section of the flue can be circular (best variation), square or rectangular (the ratio between the interior sides must be 

≤1.5) with the sides joined with a minimum radius of 20 mm. The dimension of the cross-section must be a 

minimum Ø150mm

.

The cross-sections/lengths of the chimneys shown in the technical data tables are indications for correct installation. Any alternative 

configurations must be correctly dimensioned in accordance with the general method of calculation of UNI EN13384-1 or other proven 

efficiency methods.

Below is a list of some flues available on the market:

Steel chimney AISI 316 with 

double chamber insulated with 

ceramic fibre or equivalent 

resistant up to 400°C.

Refractory chimney with 

double insulated chamber and 

external lightweight concrete 

cladding with cellular material 

such as clay. 

Traditional square-section clay 

chimney with insulating empty 

inserts.

Avoid products with an internal 

rectangular section where the 

larger side is 1.5 times the 

smaller side (e.g. 20x40 or 

15x30).

EXCELLENT

GOOD

POOR

VERY POOR

Содержание COMPACT SLIM 15

















































































Отзывы: